All sensors are connected using a cable gland.
Wired sensors are connected to the registrar, the received data is transmitted over the LP-WAN network to the base station with subsequent transfer to the cloud storage.
The recorder has a connector for connecting an external LoRaWAN antenna, and you can also use an antenna on a printed circuit board (built-in antenna).
The recorder has two connectors for connecting the interface SDI-12 and RS-485 for connecting external sensors. In addition, an external accelerometer can be connected to the recorder.
The recorder can be configured using bluetooth. In case of loss or an emergency, the location of the device can be found by means of GNSS.