CONSTRUTAG

ConstruTag was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. 

This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks. 

Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.

The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.

Asset tracker has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.

CHARACTERISTIC

PARAMETERDESCRIPTION
MAIN FUNCTIONS
Enclosure dimensions54 x 35 x 23 mm excluding fasteners
Operational temperature range-40…+85 °С
Operational humidity range0-100%
Ingress protection ratingIP-65
InstallationUsing screws, screeds, double-sided tape
Weight< 30g
POWER
Operational voltage range3.0-3.6В
BatteryReplaceable Li-SOCL2 Battery ER14335 type
Battery lifetimeup to three years depending on settings
GEOLOCATION
Geolocation methodWi-Fi/GNSS
Geolocation periodcustomizable
Wi-Fi frequency range2401-2495 MHz
Wifi sensitivity–97 dBm
Wi-Fi transmit power19dBm
Supported global navigation satellite systemsGLONASS/GPS/QZSS
Number of channels 99
Frequency range1575,42-1615,5 MHz
Sensitivity-165dBm
Cold start time60s
Hot start time6s
Embedded RTC sync with GNSSyes
COMMUNICATION
Communication standardLoRaWAN 1.0.3 class A
Radio frequency range864-1000 MHz
Maximum transmit power20 dBm
Sensitivity-137dBm
Network activation methodABP/OTAA
Supported LoRaWAN regionsRU864/AS923/AU915/EU868/KR920/IN865/US915
Adaptive data rate (ADR)yes
Data transfer periodfrom 1 minute to 1 day
Embedded RTC sync with LoRaWAN networkyes, with adjustable interval
LoRaWAN packet confirmationyes, configurable
LoRaWAN data ratefrom DR0 to DR5
MOTION ACTIVITY
Motion activity calculation methodusing the built-in accelerometer
Motion activity averaging intervalfrom 15 to 1440 minutes
Shock detection functionYes
Sleep mode if not activeYes, with adjustable interval
CONFIGURATION
Configuration interfaceBluetooth low energy
Frequency range2402-2480 MHz
BLE beacon transmission period20 seconds

MAIN FUNCTIONS

Positioning using a Wi-Fi sniffer

Positioning using GPS / GLONASS

Burglary / Tampering detection with Hall sensor

Determination of motor activity and strokes

Sealed, dust and moisture resistant housing

The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.

You can install the tracker at any place available on the site.

In case of storage of goods in an enclosed area, the asset tracker tracker determines the location by GLONASS

Long battery life

Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.

Preset options for device operation simplify its configuration:

1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2.  “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3.  “SEARCH” mode is activated by the downlink command.

Asset movement monitoring

By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock. The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer. Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.

USE CASES

DELIVERY SERVICE​

The use of LoRaWAN asset tracker allows timely monitoring of servicing services. The use of devices can significantly reduce the misuse of equipment, eliminate downtime, increase the labor discipline of maintenance personnel, and increase safety. The device can provide control of objects without an on-board network (bicycle sipes, electric scooters, gyro scooters, etc.)

LEASING & LOGISTICS

CONSTRUTAG allows you to receive information about the location of the transported goods or rented vehicles. Using the tracker, you can monitor the object. Using the tracker, you can record a hit or tamper, as well as determine the ambient temperature of the device.

INDUSTRIAL

A wide field of application of the asset tracker device is to optimize the work of companies in the industrial sector by controlling the location of expensive portable equipment and employees. Using the device, it will be possible to control working conditions in the workplace, track the movement of tangible assets, and count hours. In addition, the sensor makes it possible to detect collisions or impacts of cargo.

Housing and utilities

The device can control movable property in housing and communal services structure (lawn mowers, trimmers, cleaning machines). You can see the detailed history of movement for the period, optimally map the route and control the timing of tasks.

CONSTRUCTION

With GPS tracker, you can control the location of expensive portable equipment and employees in the enterprise. With the help of the installed device on the object, you can set the loss in a timely manner, and the installed CONSTRUTAG on the worker’s helmet will allow you to control whether there are any deviations from the work process.

Monday-Friday: 9:00 – 18:00

630058, Russian Federation, Novosibirsk city, 40 Russkaya str

CONSTRUTAG

ConstruTag was designed to adapt to most localization and activity tracking needs, for small equipment or assets in general. This mini Wi-Fi/GPS tracker allows on the one hand an outdoor geolocation (via GPS/GLONASS), but also indoor geolocation via sniffing of Wi-Fi networks. Wi-Fi triangulation also reduces the energy consumption of this LORAWAN sensor. The definition of known hotspots also makes it possible to detect if the GPS tracker is currently in a known area.

The device is equipped with a built-in accelerometer, which allows to determine the index of motor activity of the controlled object, to detect shocks and overturns.

Asset tracker has built-in data storage that can be used in the absence of LoRaWAN coverage. In this case, the device continues to work as usual, accumulating data that will be transmitted in strict sequence when the device appears in the network coverage area.

CHARACTERISTIC

PARAMETERDESCRIPTION
MAIN FUNCTIONS
Enclosure dimensions54 x 35 x 23 mm excluding fasteners
Operational temperature range-40…+85 °С
Operational humidity range0-100%
Ingress protection ratingIP-65
InstallationUsing screws, screeds, double-sided tape
Weight< 30g
POWER
Operational voltage range3.0-3.6В
BatteryReplaceable Li-SOCL2 Battery ER14335 type
Battery lifetimeup to three years depending on settings
GEOLOCATION
Geolocation methodWi-Fi/GNSS
Geolocation periodcustomizable
Wi-Fi frequency range2401-2495 MHz
Wifi sensitivity–97 dBm
Wi-Fi transmit power19dBm
Supported global navigation satellite systemsGLONASS/GPS/QZSS
Number of channels 99
Frequency range1575,42-1615,5 MHz
Sensitivity-165dBm
Cold start time60s
Hot start time6s
Embedded RTC sync with GNSSyes
COMMUNICATION
Communication standardLoRaWAN 1.0.3 class A
Radio frequency range864-1000 MHz
Maximum transmit power20 dBm
Sensitivity-137dBm
Network activation methodABP/OTAA
Supported LoRaWAN regionsRU864/AS923/AU915/EU868/KR920/IN865/US915
Adaptive data rate (ADR)yes
Data transfer periodfrom 1 minute to 1 day
Embedded RTC sync with LoRaWAN networkyes, with adjustable interval
LoRaWAN packet confirmationyes, configurable
LoRaWAN data ratefrom DR0 to DR5
MOTION ACTIVITY
Motion activity calculation methodusing the built-in accelerometer
Motion activity averaging intervalfrom 15 to 1440 minutes
Shock detection functionYes
Sleep mode if not activeYes, with adjustable interval
CONFIGURATION
Configuration interfaceBluetooth low energy
Frequency range2402-2480 MHz
BLE beacon transmission period20 seconds

MAIN FUNCTIONS

Positioning using a Wi-Fi sniffer

Positioning using GPS / GLONASS

Burglary / Tampering detection with Hall sensor

Determination of motor activity and strokes

Sealed, dust and moisture resistant housing

The body of the monitoring tracker is made of durable sealed plastic, and its design provides protection against dust and short-term immersion in liquid.

You can install the tracker at any place available on the site.

In case of storage of goods in an enclosed area, the asset tracker tracker determines the location by GLONASS

Long battery life

Due to the power supply of the GPS tracker from sources of the ER type (has a capacity of 1650 mAh) and various operating modes, the device works even on long journeys.

Preset options for device operation simplify its configuration:

1. “HOME” mode is active when the device is in range of one of the previously known Wi-Fi access points.
2.  “TRACKING” mode is automatically activated when the device leaves the range of known access points.
3.  “SEARCH” mode is activated by the downlink command.

Asset movement monitoring

By placing a tracker on your movable property, you can track the location of your vans, trucks and other rolling stock. The device allows you to timely detect emergency situations, register collisions, strikes or burglary attempts using a Hall sensor and an accelerometer. Due to the fact that the device is autonomous and does not require recharging, you can install it in the cavity of a car or equipment.

USE CASES

DELIVERY SERVICE​

The use of LoRaWAN asset tracker allows timely monitoring of servicing services. The use of devices can significantly reduce the misuse of equipment, eliminate downtime, increase the labor discipline of maintenance personnel, and increase safety. The device can provide control of objects without an on-board network (bicycle sipes, electric scooters, gyro scooters, etc.)

LEASING & LOGISTICS

CONSTRUTAG allows you to receive information about the location of the transported goods or rented vehicles. Using the tracker, you can monitor the object. Using the tracker, you can record a hit or tamper, as well as determine the ambient temperature of the device.

INDUSTRIAL

A wide field of application of the asset tracker device is to optimize the work of companies in the industrial sector by controlling the location of expensive portable equipment and employees. Using the device, it will be possible to control working conditions in the workplace, track the movement of tangible assets, and count hours. In addition, the sensor makes it possible to detect collisions or impacts of cargo.

Housing and utilities

The device can control movable property in housing and communal services structure (lawn mowers, trimmers, cleaning machines). You can see the detailed history of movement for the period, optimally map the route and control the timing of tasks.

CONSTRUCTION

With GPS tracker, you can control the location of expensive portable equipment and employees in the enterprise. With the help of the installed device on the object, you can set the loss in a timely manner, and the installed CONSTRUTAG on the worker’s helmet will allow you to control whether there are any deviations from the work process.

Monday-Friday: 9:00 – 18:00

630058, Russian Federation, Novosibirsk city, 40 Russkaya str

Open chat
Hello, how can I help you?